Sea Gyro Pty Ltd

SEA GYRO'S ADVANTAGES

1. No external appendages (less drag). Sea Gyro requires no salt water cooling
2. The stabilizer is not prone to damage by floating debris or grounding.
3. The roll reduction of the boat is constant at all vessel speed including whilst at anchor.
4. Improved roll control in extreme weather conditions, as the roll reduction is not a function of forward speed.
5. Equipment can be located in any part of the vessel, and may replace trim ballast.
6. Installation of the Sea Gyro increases the vessel's displacement by only a small percentage.
7. Lower cost than any other stability equipment of similar performance
8. Low power consumption- lower than fin stabilizer or any other gyro stabilizer available
9. Low noise similar to an air-conditioner

Sea Gyro's History

The company Sea Gyro was formed in 2004 as a result of
IP development at Curtin University of Technology in Australia and
a collection of private companies and investors.
Included in the initial group was CMST ( http://cmst.curtin.edu.au/ ),
Sun Yachts and Dr. K. Klaka.
The first protyping was achieved using models and full scale
testing on an 18m vessel.
This was followed by limited production of gyros in Australia.
Later, a larger facility was established in Malaysia to meet the
increasing demand for stabilising equipment and to reduce the
cost of production.
Today Sea Gyro is a leader in the production of gyroscopic roll
reduction equipment for the larger boats.

Sea Gyro Pty. Ltd. (Australia)

Deliveries:
Improved safety and work environment
Reduced incidence of sea sickness
Better social conditions.
Ideal for "At Anchor" usage and underway.
Safer for swimmers because there are no external devices
Low cost in buying, installing and running